Commonly used to connect two aluminum profiles at 90 degrees. Before installation, drill holes at a suitable position on the top of a strip of aluminum profile. The depth of the hole is determined by the thickness of the anchor fastener's head. After the hole is punched, install it as shown in the picture in the application scene. After the aluminum profile is fixed by anchor fastener, it will not rotate, and the fixing effect is good. The fixed part is composed of anchor fastener, screws, and T-nuts, and the cost is relatively low. However, it needs to be punched in advance, and the installation process takes a long time.
The installation of the universal Joint is showed in the picture.Sometimes called Banjo, or Anchor style connectors, Universal Fasteners are the traditional way to connect aluminum extrusion profiles. The base piece of extrusion needs a properly sized hole to receive the body of the universal fastener. Typically, when building with these connectors, it's necessary to loosly pre-load the head of the fastener into the adjacent extrusion's slot first, and then attaching the body of the universal fastener into the machined counterbore on the base piece of extrusion. Tightening the set screw will create a strong connection that prevents rotation.
Delivery Details : within 1-20 days , depends on your qty.
Packing Details : bag(250/500PCS)+carton(3000/5000)+pallet.
Carton label: None or as required
Payment: VISA / online bank payment / T&T / Alibaba payment
Our alibaba store:https://yqjinli.en.alibaba.com/
By sea or by air，expresss（fedex,DHL,TNT,UPS）
Jinli technical staff is available 24/7 for support and fast response,giving full advice on your products and sharing engineering knowladge. Whether you order or not, we will always support your business.